|
Product Details:
|
| Key Selling Points:: | Long Service Life | Material:: | Aluminum |
|---|---|---|---|
| Technology: | Cryogenic And Chemical Heat Exchanging | After Warranty Service:: | Video Technical Support, Online Support, Spare Parts, Field Maintenance And Repair Service |
| After-sales Service Provided:: | Video Technical Support, Field Installation, Commissioning And Training, Field Maintenance And Repair Service, Online Support | Maximum Working Pressure:: | 8 MPa |
| Working Temperature Range:: | -196~+50 C | Application:: | Multi Stream Heat Exchanging For Cryogenic Gas And Chemical Industry |
| High Light: | 4.5Mpa plate cooler heat exchanger,nickel brazed plate cooler heat exchanger,aic brazed plate heat exchanger |
||
Brazed Aluminum Plate Heat Exchanger For Cryogenic Air Separation Plant
Description
Plate heat exchanger equipment consists of plate heat exchanger, balance tank, centrifugal sanitary pump, hot water device (including steam pipeline, hot water injector), bracket and instrument box. For sterilization cooling of milk or other heat-sensitive liquids.
Specifications
| Capacity range | 0.1m3/h to 300m3/h |
| Operating pressure | ≤4.5MpaG |
| Operating temperature | ≤250℃ |
| Plate material | Stainless steel 304/316 l |
| Welding material | Copper, nickel |
Advantage
The plate heat exchanger is easy to change the heat exchange area or process combination. As long as a few plates are added or reduced, the purpose of increasing or reducing the heat exchange area can be achieved; changing the plate arrangement or replacing a few plates can achieve the required Process combination to adapt to new heat exchange conditions, while the heat transfer area of shell and tube heat exchangers is almost impossible to increase.
The plate heat exchanger is light in weight, the thickness of the plate is only 0.4~0.8mm, while the thickness of the heat exchange tube of the shell and tube heat exchanger is 2.0~2.5mm, and the shell of the shell and tube type is heavier than the frame of the plate heat exchanger. Much more, the plate heat exchanger is generally only about 1/5 of the weight of the shell and tube type.
Classification
1. According to the heat exchange area in the unit space, the plate heat exchanger is a compact heat exchanger, mainly compared with the shell and tube heat exchanger, the traditional shell and tube heat exchanger occupies a large area.
2. According to the process use, there are different names: plate heater, plate cooler, plate condenser, plate preheater;
3. According to the process combination, it is divided into single-pass plate heat exchanger and multi-pass plate heat exchanger;
4. According to the flow direction of the two media, it is divided into co-current (parallel flow) plate heat exchanger, counter-flow plate heat exchanger, cross-flow (cross-flow) plate heat exchanger, the latter two are used more;
5. According to the gap size of the flow channel, it is divided into conventional gap plate heat exchanger and wide gap plate heat exchanger;
6. According to the corrugation, the plate heat exchanger has a more detailed distinction, which will not be repeated, please refer to: plate heat exchanger plate corrugated form.
7. According to whether it is a complete set of products, it can be divided into stand-alone plate heat exchangers and plate heat exchanger units.
Contact Person: admin
Tel: +8619337261669
