Plate Type heat exchanger for variety of areas
Plate design to development are absorbed and adopted the national advanced technology and experience, strong adaptability, and superior performance.
Meanwhile cushion own production of good conditions, the factory production of plate heat exchangers can be widely used for heating, petroleum, chemical, food, paper, pharmaceuticals, machinery, metallurgy and other different areas.
Specifications
| type | BR0.05 | BR0.1A | BR0.1B | BR0.2 | BR0.23 | BR0.3 | BR0.55 | BR0.85 | BR1.0 |
| heat exchange area(m²) | 0.0618 | 0.0966 | 0.101 | 0.204 | 0.222 | 0.318 | 0.547 | 0.86 | 1.055 |
| tray spacing (mm) | 3.8 | 3.8 | 4 | 4 | 3.8 | 3.8 | 0.547 | 3.8 | 3.8 |
| diameter( m) | 0.0076 | 0.0076 | 0.008 | 0.008 | 0.0076 | 0.0076 | 0.0076 | 0.0076 | 0.0076 |
| sectional area(m²) | 0.000494 | 0.000787 | 0.00072 | 0.00072 | 0.00106 | 0.00106 | 0.00166 | 0.00225 | 0.00225 |
| angle diameter (mm) | 38 | 60 | 45 | 70 | 75 | 80 | 135 | 200 | 200 |
| capacity (m3/h) | 25 | 60 | 35 | 85 | 90 | 110 | 310 | 680 | 680 |
| heat exchange area( m²) | 1-5 | 3-10 | 3-10 | 4-25 | 5-30 | 8-40 | 25-120 | 50-180 | 80-250 |
| pressure (mpa) | 2.0 | 2.0 | 2.0 | 1.6 | 1.6 | 1.6 | 1.0 | 1.0 | 1.0 |
| working temperature | Depending on the gasket material | ||||||||
Service:
1.Before sending the machine, we will test and adjust, so you can use directly when you get it.
2.Operating video & instruction will be sent to clients, to help them better use the machines.
3.Any problems occur while using, professional advice will be given by us.
4.All kinds of frequently used parts are supplied from us all the year round.
Contact Person: Mrs. Kelly
Tel: +86 15824687445
